The SW218HP is an high-power, large-format subwoofer engineered for large venues and outdoor events demanding extended, high-impact low-frequency reproduction down to 30Hz.
Designed for versatility, the SW218HP can be deployed individually or arrayed in multiples, either horizontally or vertically, utilizing VAL’s stacking system to ensure safe and secure stacking. Ground stacking is also compatible with VAL’s Point Source (QX, ZX series) and Line Array (VLA, WP, WCX series) systems.
At its core, the SW218HP houses two custom-engineered 18”, 1250W RMS each, high-excursion drivers featuring 4.5” voice coils and die-cast aluminum frames. The direct radiating, bass-reflex cabinet design delivers a powerful, extended frequency response of 30Hz to 600Hz (-6dB), achieving a staggering peak SPL of 139dB.
The rugged enclosure is built for the rigors of touring and professional use, featuring a kick-resistant steel grille backed by reticulated foam, finished with a durable, textured, hard waterborne black coating. Two heavy-duty ergonomic handles per side ensure easy handling and transport.
Integrated rubber feet on multiple surfaces allow secure ground stacking in both horizontal and vertical orientations, locking into place via recessed stacking cups.
Dual integrated top-hat pole mounts (horizontal and vertical) provide maximum flexibility for pole-mounting full-range loudspeakers directly above the SW218HP.
The rear panel features a precision-engineered cast aluminum connection plate fitted with dual 4-pin speakON® connectors (input and link), wired +1/-1 for the subwoofer signal and pass-through on +2/-2.
- High Power Handling: 2500W RMS, 10000W Peak power handling
- Extreme Low-End Performance: 30Hz response for deep, impactful bass
- Massive Output: 139dB peak SPL for the most demanding environments
- Custom High-Excursion Drivers: Proprietary 18” transducers with 4.5” voice coils
- Flexible Deployment: Horizontal or vertical stacking with secure interlocking system
- Road-Ready Construction: Touring-grade build with kick-proof grille and heavy-duty finish
- Pole-Mount Ready: Dual top-hat mounts for ultimate system flexibility
| Design | 2 x 18” Subwoofer, Direct Radiating, Bass Reflex Subwoofer |
| Impedance | 4 Ohm |
| Power Handling (AES) | 2500 Watts (continuous) |
| Max. Power Handling (AES) | 5000 Watts (program) 10000 Watts (peak) |
| Sensitivity 2.83V / 1m | 100dB |
| Max. SPL | 133dB cont 139dB peak |
| Frequency Range (-6dB) | 30Hz – 600Hz |
| Dispersion | Omni |
| Recommended Amplification | 2500 – 5000 Watts |
| System Controller | VAL DSP Solutions |
| Speaker Cables | Min – 2 x 4 mm² Preferred – 2 x 6 mm² |
| Components | 2 x 18” Low Frequency Driver |
| Crossover | Active – LPF – 80 – 110Hz HPF – 30Hz |
| Connectors | 2 x 4 pole speakON® connectors |
| Dimensions (H x W x D mm) | 1205 x 615 x 750 |
| Weight (kg) | 102 |
| Shipping Weight (kg) | 112 (1 cabinet per carton) |
| Colour | Black |
| Rigging | Foot and cup stacking system |
| Fitted as Standard | Foot and cups stacking system, Top hat, large metal handles |
| Additional Descriptive Data | Birch plywood construction, durable scratch-resistant black textured paint finish, kick-proof steel grille, black foam with VAL logo |
related products
ICOMM PSW200
INTEGRATED COMMERCIAL (ICOMM) SERIES
High performance active subwoofer
- Components : 1×12” LF
- Power Handling : 200W RMS / 800W peak
- Active, amplifier in-built
- Down firing woofer
X118P
Active Subwoofer
High performance vented active subwoofer
- Components: 1×18” LF
- 3000W PEAK / 1500 RMS power output
- Class leading 134 dB max SPL
- Integrated DSP, line input
SW118HP
SUBWOOFERS
High performance vented subwoofer
- Components : 1×18” LF
- Power Handling : 1000W RMS
- Impedance : 4 ohm
- Max SPL : 135 dB
SW218HP
SUBWOOFERS
High performance direct radiating subwoofer
- Components : 2×18” LF
- Power Handling : 2500W RMS
- Impedance : 4 ohm
- Max SPL : 139 dB
SW218HD
SUBWOOFERS
- Components: 2×18” LF
- Power Handling: 3000W RMS
- Impedance: 4 ohm
- Max SPL: 142 dB