Features   Applications   Specifications
 
 

The ZX series is our Premium range of loudspeaker systems. This Ultra High Performance series features 5 models. These are designed for the most discerning applications both in Touring and fixed install. Only high end and the best components are used in this series. We went to large extents to develop custom drivers along with our Driver manufacturer to get the desired results and timelines required by us. This series is designed as a no holds barred reference series to outperform the best in the market.

The ZX 12 and ZX 15 are full range high end Loudspeakers capable of handling 800W RMS of continuous power. Both use a custom HF Compression driver with a 1.4” Exit and 3” Aquaplased TC4 diaphragm. The ZX12 and ZX15 are capable of producing a SPL of 132db and 133db respectively peak acoustical output. Both these models have pole mount, fly points and a wedge for monitor use. The ZX15s 15” LF with a 4” voice coil and 220mm magnet diameter which is larger than that found in most subwoofers. It is sweet sounding even at a distance of 2m. It is ideal for both monitor or FOH use. The ZX15HP is a step up from the ZX15 and features all Neodymium components to reduce weight and increase efficiency and it has average sensitivity of 99db and 1000W RMS power handling capacity. It is capable of a peak acoustical output of 135db. The ZX 152 is a dual 15” two way top capable of handling 1600W RMS power. The 15” LF drivers use a high efficiency neodymium magnet to reduce weight and increase efficiency. It features Top of the Line performance and reliability along with highly dynamic and holographic reproduction of sound. This speaker is designed for applications requiring very high SPL without any compromise on fidelity. The ZX 153 is an incredible 15” 3 way loudspeaker system designed to be operated only in biamp mode via DSP. This is a high SPL, light weight loudspeaker using high efficiency neodymium magnets for all the drivers. It features an Aquaplased TC4 diaphragm for ultra smooth HF reproduction along with a Rotatable MFH horn with silk fiber loaded cone for incredible mids. This speaker is designed for high SPL applications where nothing but the best mid frequency and vocal reproduction will do.

   
  Features
 
  • The highest SPL of the category
  • Real 1600W RMS power capacity
  • Top of the Line performance and reliability
  • Highly dynamic and holographic reproduction
  • Premium custom made European drivers
  • Aquaplased TC4 Diaphragm for ultra smooth HF reproduction
  • Proprietary 60ºx40º asymetric horn
  • Touring grade textured black paint finish
  Applications
 

The ZX152 Loudspeaker is suitable for near field main PA reinforcement with or without subwoofer, portable or permanent installation, monitor in stages, and delay fill. Suitable in spaces like:
  • FoH
  • Multi-functional room
  • Auditorium and Theatre
  • Pub
  • Bar
  • Night club
  • Commercial announcements
  • Touring and rental applications
  Specifications
 
     
Power Handling
 
1600W RMS (AES)
3200W Program / 6400W Peak
Nominal impedance
 
4 ohms
Frequency response (-6dB)
 
45Hz - 18000Hz
Average Sensitivity
 
100dB/W/m
Calculated Maximum SPL / 1m
 
132dB continuous
135dB Program
138dB Peak
Nominal Directivity
 
60º x 40º asymetric (10° up, 30° down) above 1000Hz
Recommended low cut filter
 
30Hz 24dB/oct in full range mode
60-100Hz with subwoofer
LF
 
Custom made 15" CELTO Acoustique
Neodymium magnet, 4” Voice coil
HF
 
1.4” exit CELTO Acoustique Ferrite magnet, 3” Aquaplased TC4 diaphragm
Crossover
 
Passive mode only
1400Hz, 12dB/oct on LF, 18dB/oct on HF
Flying hardware
 
10 M8 points
Connectors
 
2pcs NEUTRIK Speakon® NL4MP (1+/1- Input)
Floor Monitor use
 
No
Pole mount
 
No
Cabinet
 
CNC made with tongue and grove assembly
18mm birch plywood
Finish
 
Touring grade textured black coating
Size (WxHxD)
 
465x1170x478mm
18.3"x46.0"x18.8"
Net weight 
 
52Kg (114.6lbs)
   
   
 
   
 
  © 2010 - 2011 VAL audio, Konigswinter, Germany   Home   Products   Downloads   About Us